LATEST NEWS & EVENTS
Broadband High-Power Amplifiers offer High Gain & Low Noise Figure for Mission-Critical Applications
These new Power Amplifiers (SSPA) from Quantic PMI offer high gain and low noise figure performance for use in pulsed airborne, naval, and ground radar applications, as well as found in weather forecasting Doppler radar systems and utilized in air traffic control and precision approach radar systems. These power amplifiers offer remarkably high gain up to +53 dB and saturated output power above 40 dBm (10 W).
Quantic PMI (Planar Monolithics) Announces Global Distribution Agreement with Richardson RFPD!
This global distribution agreement creates an opportunity for Quantic PMI to provide customers with extended Hi-Rel off-the-shelf product access to available inventory of our industry-leading products through Richardson RFPD distribution as well as worldwide representation to our MOTS (Modified-off-the-shelf) products and custom solutions using their strong field applications engineers (FAEs) and extensive network of professionals.
Quantic PMI to exhibit @ AOC 2024
AOC 2024 is the premier conference for electronic warfare, electromagnetic spectrum operations, cyber-electromagnetic activities, and information operations professionals from around the world. Connect with us at the 61st Annual Meeting and Symposium of the AOC at the Gaylord National Resort & Convention Center in National Harbor, MD, USA from December 11 – 13, 2024, Booth 817!
FEATURED PRODUCTS
Log Video Amplifier GMDA-D1007
Frequency Range: 0.5 to 2 GHz
TSS: -65 dBm
Logging Range: -60 to +7 dBm
Logging Linearity: ±1.5 dB
Flatness: 100 mV Peak to Peak
RF Safe Input Power: 23 dBm
Max Output Voltage: 2.5 V
Input VSWR: 2.3:1
Video Rise Time: 30 ns
Recovery Time: 1 us
Throughput Time: 30 ns
Video Bandwidth: 10 MHz
Offset Voltage: ±50 mV
SMA Female Connectors
Housing: 3.5″ x 3.2″ x 0.5″
Log Video Amplifier SDLVA-0R61R1-65-CD-SFF-2
Frequency Range: 0.6 to 1.1 GHz
Limiting Output Level: 0 to +5 dBm
RF Output Limiting Flatness: ±0.091 dB
TSS: -68 dBm
VSWR: 1.27:1
Power Input: 13 dBm
Log Slope: 30.5 mV/dB
Log Range: -65 to 0 dBm
Log Linearity: ±0.97 dB
DC Offset: 100 mV
Pulse Range: 30 ns to CW
Rise/Fall Time: 5.5 ns/23.3 ns
Recovery Time: 70 ns
SMA Female Connectors
Housing: 3.2″ x 1.8″ x 0.4″
Log Video Amplifier SDLVA-18G40G-65-CD-292FF-OPTHS
Frequency Range: 18 to 40 GHz
TSS: -65 dBm
Input Power Handling: 10 dBm
Video Log Range: -63 to +2 dBm
Video Log Linearity: 1.81 dB
Video Log Slope: 24.8 mV/dB
Video Frequency Flatness: 1.9 dB
Pulse Width Range: 25 ns to CW
Video Rise Time: 7 ns
Recovery Time: 60 ns
Delay Time: 15 ns
Input VSWR: 2.02:1
2.92 mm/SMA Female Connectors
Housing: 2.37″ x 1.80″ x 0.42″
Low Noise Amplifier PE2-26-0R58-5R0-23-12-SFF
Frequency Range: 0.5 to 8 GHz
Gain: 28.8 dB
Gain Flatness: ±0.93 dB
Noise Figure: 4.43 dB
OP1dB: 25 dBm
VSWR: 1.56:1
SMA Female Connectors
Housing: 1.08″ x 0.71″ x 0.29″
Low Noise Amplifier PLNA-2G4G-42-3DB-9DBM-SFF
Frequency Range: 2 to 4 GHz
Gain: 44.3 dB
Gain Flatness: ±1.35 dB
Noise Figure: 2.8 dB
Saturated Output Power: 8.3 dBc
Harmonics: -13 dBc
VSWR: 1.67:1
SMA Female Connectors
Housing: 2.75″ x 1.15″ x 0.66″
Low Noise Amplifier PE2-30-8R018R0-3R5-22-12-SFF
Frequency Range: 8 to 18 GHz
Gain: 34.07 dB
Gain Flatness: ±0.8 dB
Noise Figure: 4.34 dB
OP1dB: 19 dBm
VSWR: 1.9:1
SMA Female Connectors
Housing: 1.08″ x 0.71″ x 0.29″
SPST Absorptive Switch P1T-200M18G-80-T-SFF-F192A-CTLSMA
Frequency Range: 0.2 to 18 GHz
Insertion Loss: 2 dB
Isolation: 84.7 dB
VSWR: 1.84:1
Operating Power: 27 dBm
Rise/Fall Time: 5 ns
Delay On/Off Time: 5 ns/10 ns
SMA Female Connectors
Housing: 1.0″ x 1.0″ x 0.5″
SP1T Absorptive Switch P1T-18G40G-30-1515-292FF
Frequency Range: 18 to 40 GHz
Insertion Loss: 3.57 dB
Isolation: 48 dB
VSWR: 1.5:1
Switching Speed: 15 ns
Input Power: 23 dBm
2.92 mm Female Connectors
Housing: 2.00″ x 1.50″ x 0.75″
